Fetal Monitor BT-330 LCDBT-330 is an Antepartum Fetal monitor displaying FHR, UC, and FM on LCD Monitor to check fetal health after measuring them. It has also Event marker function enabling a pregnant woman in childbed to indicate fetal movement point by pushing its button by herself when she feels fetal movement. BT-330 indicated FHR as numeral by irradiating ultasound at the abdomen, abstraching doppler frequency of heart beat cycle from the signals reflected from fetal heart, outputting FHR change as a sound, and analyzing these signals. Besides, you can measure UC by using pressure sensor, indicate, and print the data of FHR and UC. BT-330 prints FHR, UC, and FM on thermal paper and displays LCD monitor.
• Twin fetuses Measurement
• Automatic fetal movement Measurement.
• Alarm & Timer
• Printing speed and color depth control functions.
• Automatic printing & Zoom
• Wide Range of FHR measurement : 30~240 bpm
• Simultaneous display through printer & LCD monitor
• Data save
• FHR Sound save in PC by BCM 330 Software.
• Wire & Wireless external interface for central monitoring system.
|Dual Pulsed Doppler|
|Ultrasound Frequency : 0.985MHz|
|Intensity : 10 mW/㎠ or less|
|FHR Range : 30 ~ 240 bpm|
|FHR Accuracy : ±2% of Range|
Auto-detection of Dual Fetal Movement
Frequency Response : DC ~ 0.5 Hz
Refernce (zero) Control
Measurement Range : 0 ~ 99 units
Thermal Array Type
Print Speed : 1. 2. 3 cm/min
Paper Feeding Function
Mono LCD : 320 X 240
3 Channels (FHR·, FHR·, UC)
Alarm Upper /Lower Value
|FHR· Offset Function|
Auto Print Function
|Data Saving for 12 hours|
|Hart Sound Recording in BCM300|
Input : AC 100 ~ 240V (50/60 Hz)
Output : DC 16V, 2.8A
Consumption : 80 VA
|Battery Operation : continuously 2 hours|
191mm(H) × 187mm(L) × 201mm(D)
|Wireless : Bluetooth|